Caller ID issue => Betamax account in Voice Gateway
Stewart:
Quote from: Momo on April 24, 2012, 05:17:58 am
If I understand, my username in AuthuserID will be overwritten with your settings...
Unfortunately, you are probably correct. In the referenced post, there is an example given:
VG1-8 AccessNumber = SP1(sip.inum.net;user=1000;op=imns)
I don't know whether that's just a typo, or if user= and ui= are somehow different and will let you do what you want.
Otherwise, you'll either have to put Rynga in an SPx (where it's known that you can set the URI and AuthUserName differently), or you'll have to use a provider with IP address authentication, or one that lets you set caller ID on their Web portal.
hwittenb:
I can confirm Stewart's postings. I ran an OBi test with my Voipbuster Betamax number that has a registered caller id. I don't think there is a way to do it with a VoiceGateway (VG) but it does work if setup properly in SPx. In the VG I believe you only can setup to call without setting the Betamax registered caller id.
To setup in in the main SPx account under SIP Credentials you setup your Betamax AuthUserName with your Betamax userid and you setup the URI field with your registered (with Betamax) caller id number. In my case I use the number including the country code.
When setting up in the Voice Gateway the AuthID and the ui=override settings are just for the UserID in the authorization. I don't know how to setup the caller id, it uses the AuthID setting. I tried setting it in the AccessNumber and I tried the user= suggestion. Neither put the caller id in the From: or Remote-Party-ID: in the Sip INVITE which is what is required.
Felix:
I have account with VoipDiscount (one of Betamax companies); and I specify caller id in the portal. And no matter what I put in SPx, it is ignored, and the caller id comes whatever I set on the portal.
Does Voipbuster and ringo work differently? Or I missed something in this conversation?
Note, that I am fine the way it is... So, it's just idel curiosity :o
Stewart:
Quote from: Felix on April 24, 2012, 11:17:20 pm
Does Voipbuster and ringo work differently?
Ringo definitely works differently. Actually, I'm amazed that he's still working. http://en.wikipedia.org/wiki/Ringo_2012
Huib:
Quote from: hwittenb on April 24, 2012, 10:00:15 am
To setup in in the main SPx account under SIP Credentials you setup your Betamax AuthUserName with your Betamax userid and you setup the URI field with your registered (with Betamax) caller id number. In my case I use the number including the country code.
Can you share how you have setup your URI field? I'm looking to add my callerid to my Betamax/Dellmont clone but don't know the exact setup necessary for the URI field you're speaking off.
Thanks!
Navigation
[0] Message Index
[#] Next page
[*] Previous page