Hi,
I want to use a Cisco 7960 SIP phone for both incoming and outgoing calls with an OBI110.
I had initially setup GV and Obi SP1, and incoming and outgoing calls worked perfectly.
I then added and configured SP2, and among other things, changed incoming on SP1 to:
sp2(12345@192.168.123.249:5060)
with the IP and port matching the IP address and VOIP port of the 7960, 12345 being the auth name of its line1.
I can make outgoing calls from the 7960 without a problem. Voice can be heard both ways, just fine.
When I call the GV # from my Verizon cell, the 7960 DOES ring fine on its line1, and it shows the SP2 name as the caller. So far so good.
HOWEVER, when I try to answer the line on the 7960, nothing happens. The caller's phone still rings like nobody answered.
I have played with all the settings, - which btw helped me understand the relevant and minimal pieces of information needed for this setup -, but answering the line that rings on the 7960 just doesn't answer the call at all from the caller's standpoint, and it eventually goes to voicemail.
Any suggestions on what to check/try ?
Thank you in advance!
Rob