Digitmaps for Obi 202 different from Obi100 ??? Help.

(1/2) > >>

carl:
I just tried to use my digitmap from Obi 100 for Obi 202 and it is not working.
I used the same digitmap to set up service for my relative on the old Obi 100 without problems.
Does anyone know ?

RonR:
Please post anything that's not Default and describe what occurs on the OBi202.

carl:
Expert configuration> ITSP profile C general> checkmarks removed from Obi and default settings at the digitmap>
 deleted the Obi digitmap and replaced with following from my Obi 100 :   *1571|<*1688>(<0(0>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)|<011:00>xx.)|*168800xx.|(Mipd)|[^*#]@@.'@'@@.)
and submitted.
Getting busy tone only while dialing out.

RonR:
Quote from: carl on April 25, 2012, 10:00:40 am

 *1571|<*1688>(<0(0>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)|<011:00>xx.)|*168800xx.|(Mipd)|[^*#]@@.'@'@@.)



That DigitMap won't work in any OBi.  It's missing the opening paren, <0(0> is not valid syntax, and even ignoring the missing opening paren, there is still mismatched parenthesis in the middle.

Please copy/paste the working DigitMap from the OBi100 so we can start with it.

carl:
(*1571|<*1688>(<00>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)|<011:00>xx.)|*168800xx.|(Mipd)|[^*#]@@.'@'@@.)

Navigation

[0] Message Index

[#] Next page