DigitMap setting reverting to Default value

(1/1)

cocoLoco:
Hi guys,

I just purchased an OBI110 to use in Australia and I am trying to set it up with my new Faktortel account.
The device comes from amazon (US), not sure if it may cause problems or not.

I am able to enter my settings in the web interface (which I access on the IP address of the device), and I can save them.
However when I go to Service Providers > ITSP Profile A > General and change the DigitMap (to allow me to call the Faktortel test number which is 600
- I can save my new value
- when I come back to the page the value is here
- once I reboot the device and come back to the same menu, the value is reverted to the default value, and the "Default" checkbox is ticked.

I am missing something?
Thanks,

cocoLoco

Stewart:
If you want to manage the OBi manually (via its web interface), you must set (in System Management -> Auto Provisioning) both ITSP Provisioning -> Method and OBiTalk Provisioning -> Method to disabled.

Alternatively, you can manage the OBi from the OBiTalk portal; any changes you make locally will be overwritten.

cocoLoco:
Thanks for you quick answer, I'll try that !

Navigation

[0] Message Index