Since 5/8/2012 night, GV stop working
Had2:
same here it happen last night around 11:30 PM I was on the phone at the time.
nicmart:
Quote from: RFord on May 09, 2012, 03:58:54 am
I think everyone is affected by this, since my OBi110 Status shows the same. I also have GV setup on Asterisk and is able to make and receive calls via Google Voice using this setup. Something is definitely wrong with the OBI/GV Interactions.
Edit: I quickly enable the second line on GV Settings. So if my GV number is dialed, the calls will come into my OBi110 on SP2 and my callers will not even aware that my GV number is not working. Also, switch my Phone Primary Line to Trunk group, which tries SP1 (GV) first, then SP2 (Anveo) and then VG3 (CallWithUs). I hope everyone has a backup line for instances like these.
I've no idea what any of this means, but I tried configuring SP2 and it is also Backing Off.
theDot:
Ditto here, "Call Back" is displayed even though I don't use Google 2-Step verification. I went through the whole process to set it up and entered in the new password for it into my OBi, but that didn't seem to work either. Call Back still showed up. I've disabled 2-step on my GV account now and re-entered my old PW back into OBi in hopes these guys fix this thing. Just glad to know I'm not the only one.
yorktown:
We have multiple devices. 2 went down with Backing Off. I reactivated the device and reset the GV accounts with Obitalk. Still no good. Both were originally working - I set them up personally and used them
RFord:
Are you setting up SP2 with GV? If so, you need another VOIP provider for that purpose. In my case I'm using Anveo and I also have CallWithUs (Voice Gate Account) for overseas calls. You should get a free DID from Callcentric and setup that for free incoming and fund the account for outgoing calls.
Quote from: nicmart on May 09, 2012, 04:31:07 am
Quote from: RFord on May 09, 2012, 03:58:54 am
I think everyone is affected by this, since my OBi110 Status shows the same. I also have GV setup on Asterisk and is able to make and receive calls via Google Voice using this setup. Something is definitely wrong with the OBI/GV Interactions.
Edit: I quickly enable the second line on GV Settings. So if my GV number is dialed, the calls will come into my OBi110 on SP2 and my callers will not even aware that my GV number is not working. Also, switch my Phone Primary Line to Trunk group, which tries SP1 (GV) first, then SP2 (Anveo) and then VG3 (CallWithUs). I hope everyone has a backup line for instances like these.
I've no idea what any of this means, but I tried configuring SP2 and it is also Backing Off.
Navigation
[0] Message Index
[#] Next page
[*] Previous page