Obihai is deleting unwanted topics
RonR:
ShermanObi,
You did not confirm that after these options are set, Obihai will have no ability to access the device in any way.
Exactly what must be done to ensure that Obihai cannot view or alter a device's configuration nor update the device's firmware? What settings are required to prevent ALL outside access to an Obihai device by anyone other than the owner?
ShermanObi:
@Mango: Use the settings below to achieve the state for which you request confirmation.
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Voice Services -> OBiTALK Service -> Enable : (unchecked)
@ronr: Confirmed.
Have a great weekend and thanks for your support.
Mango:
Thank you very much for your response, and for all your hard work for the VoIP community.
I hope you as well have a great weekend! :)
QBZappy:
ShermanObi,
Thank you for your reply. If you were more clear in your first reply, the last four posts were unnecessary in order to press you for a final and clear reply. You are obviouly replying to Mango and RonR directly, and indirectly to everyone else. The style of your responses makes me feel like I am reading the output of the big "OBihai syslog server". The reply is in human readable form, however sometimes I'm left scratching my head wondering if I understood the log message completely. It is sometimes too Borg like. Loosen up a little.
You know we all love your product. That's why we care.
Cann't wait for the next update. :)
Have a nice weekend.
VaHam:
Quote from: ShermanObi on May 11, 2012, 11:59:18 am
To answer questions from RonR and VaHam...
The following parameter settings will disable OBiTALK services.
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Voice Services -> OBiTALK Service -> Enable : (unchecked)
Auto Firmware Update & ITSP Provisioning are parameters used primarily by ITSPs (and managed services VARs). OBiTALK does not use either of these parameters. Some individuals & organizations may use the Auto Firmware Update as described in this FAQ: Click Here
Your response addresses disabling OBiTALK services and OBiTALK provisioning; but mentions that OBiTALK does not use the Auto Firmware Update & ITSP Provisioning parameters. Are you saying that anyone who did not have those enabled, should not have been upgraded recently? Or are you saying that OBiHai ignores those settings and performs upgrades when it deems them to be necessary? Note I am saying OBiHai (the Company) not OBiTALK here; which would include OBiTALK and any other software operated or licensed by OBiHai.
The link you provided describes how enable auto upgrades. ("How do I automate upgrades to the most current available firmware?")
I remain uncertain that the above responds to my question. Which was:
Quote
Can you provide a list of all settings required to disable ObiTalk and any other features necessary so that OBi devices can no longer be accessed by anyone other than the physical owner/user?
Users who are concerned about security over features can then make a choice as to which they prefer.
I am asking for all settings necessary to keep anyone other than myself from being able to access my OBi's for any purpose other than simple processing of phone calls.
Navigation
[0] Message Index
[#] Next page
[*] Previous page