Install problems - Can't get to admin page

(1/4) > >>

intersys:
Just got the obi110 and having problems. I get a valid ip address but when trying to add device to obitalk or use with GV I get a no service message. I have a Dlink DIR655 router and set the Obi to the DMZ zone. Also tried port forwarding Port 5222. I will only be using it with GV once I get it configured. Any advice, please. Also can't ping the OBI so obviously can't get to the device web page. IP is set to 192.168.1.2 on the Obi which is within my network range.

Thanks

QBZappy:
Quote from: intersys on March 12, 2011, 11:55:50 am

Just got the obi110 and having problems. I get a valid ip address

How did you get a valid IP address and then you say "you can not ping it"? Not sure what that means.

intersys:
Dialing ***1 on phone reports IP as 192.168.1.1

I just succeeded in pinging - reset DHCP in router to full range from 192.168.1.2 - 192.168.1.254 and rebooted

Still cannot bring up 192,168.1.2 in browser nor get it recoginized in ObiTalk

Thanks for the reply -still trying to get set up

QBZappy:
intersys,

What address is the gateway router. I think you left out the Obi address of 192.168.1.1

intersys:
Router is at 192.168.1.1

Obi is at 192.168.1.2

Navigation

[0] Message Index

[#] Next page