OBI100 Lost Dial Tone Flashiing Phone LED

<< < (2/2)

RonR:
There is something shorted internally in the OBi's PHONE Port.

You will need to contact Obihai or the supplier for a replacement.

paulv:
Ron,

agreed. It was great while it worked & this looks like classic infant mortality so I'll return it to Amazon and get another one.

thanks again - paul

RFord:
You said you have the OBi100, so how could you disconnect the cable from the LINE port?

Quote from: paulv on May 11, 2012, 03:56:12 pm

Thanks Ron,

here's what I get.

Disconnect everything from the LINE and PHONE Port jacks. Verify that the PHONE Port LED is still flashing. YES IT IS

State : - OFF HOOK
LoopCurrent : 19 ma
VBAT : 17V
TipRingVoltage : 2V

The unit feels very warm and I smell hot electronics.

- paul

paulv:
Correct, I had the obi100 and unplugged the phone from the phone port. The unit is now on it's way back to Amazon and I should get another obi100 5/15/12. Hopefully this one will last a bit longer.  :)

- paul

Navigation

[0] Message Index

[*] Previous page