Power light blinking, no IP

<< < (5/5)

Shale:
Power light Flashing Green: The OBi is looking for a DHCP IP address.

Try putting the OBi202 into 100 Mb full duplex Ethernet mode. http://www.obitalk.com/forum/index.php?topic=5454.0

Then reboot your router.

RoyNeslo72:
I know this is an old thread, but I wanted to add another recovery option for those like me who tried everything in this thread (hard reset, different power supply, etc.) but still had a bricked Obi.

What did work for me was updating the firmware as described here:
http://www.obihai.com/support/troubleshooting/alt.

If you've tried everything else, this might get your device working again.

Navigation

[0] Message Index

[*] Previous page