Obi 110 Callcentric Configuration

(1/1)

lmatheusobi:
I cannot seem to get my Obi110 to register my callcentric account, I am always getting:

Register Failed: 403 Incorrect Authentication

I have rechecked my Callcentric number and password many times. I really cant figure out the problem.

Can anyone help me out with this please?

RonR:
Here's what you want to end up with in the OBi itself for Callcentric on SP2:


Service Providers -> ITSP Profile B -> General -> Name : Callcentric
Service Providers -> ITSP Profile B -> General -> DigitMap:

(*123|<'S'B:**275*>xx.|<**275*:SB>xx.|[2-9]11S0|<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|
011xx.|(Mipd)|[^*#]@@.'@'@@.)

where aaa is your local area code.

Service Providers -> ITSP Profile B -> SIP -> ProxyServer : callcentric.com
Service Providers -> ITSP Profile B -> SIP -> OutboundProxy : callcentric.com
Service Providers -> ITSP Profile B -> SIP -> RegistrationPeriod : 3600

Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : 1777nnnnnnn
Voice Services -> SP2 Service -> AuthPassword : (sip password)
Voice Services -> SP2 Service -> CallerIDName : (callerid name)
Voice Services -> SP2 Service -> MWIEnable : (checked)
Voice Services -> SP2 Service -> X_VMWIEnable : (checked)
Voice Services -> SP2 Service -> MessageWaiting : (unchecked) (Default unchecked)

eclas:
Hello RonR,
I was working with support for about 3 days and couldn't get CC to register on SP2 no matter what we did. We concluded that my sp2 on the obi110 was shot but then I tried your settings in this thread and bingo, it worked! So thank you very much for that post.
I have a question tho...
I have a phone that has it's own distinctive rings. If the phone rings, no matter which line, rings with what is set on the phone.
I changed the ring for sp2 using Voice Services>SP2 winth ring profile-A and DefaultRing to 6

Is it not possible to change it because of the phone system's ring choice?

Thanks

Navigation

[0] Message Index