SIP registration problem? Disable SIP ALG in your router config.
Felix:
Quote from: zhanzhangphd on July 06, 2012, 09:46:13 am
Hi,
I just got a OBI 100 and my 2WIRE Router does not let me register.
Any expert can help me with disabling the SIP?
Thanks in advance
Hi, zhanzhangphd and welcome to this forum
You may want to start a topic (probably in the "new user" forum), rather than hijack a sticky with unrelated question. You will probably benefit from Googling a little; at least until you understand that "disabling the SIP" on a VoIP adapter is like "disabling the engine" on the car. An expert can probably do it; but you may not like the results! ;)
lacibaci:
For ZyXEL ZyWALL USG series firewalls (firmware 3.0 and later) you have turn SIP ALG on. By default, it is off and you will not be able to receive calls. No other change was necessary for me.
Hyrules:
For the Asus RT-N56U there is only one way of disable the SIP ALG function with the latest firmware.
Activate the telnet function of the router and do it by hand.
nvram set nf_sip=0
nvram commit
reboot
That's it the SIP ALG should be disable.
This should solve alot of head ache. Not only sip registration.
Lucycan:
Latest firmware for the DIR-655 is 2.10 NA
I have disabled SIP but still unable to connect to the Anveo e911.
Any thoughts? Thanks!
Sampratt:
According to me you are getting this problem because SIP ALG or resource manager. I would like to recommend you to upgrade the firmware. Otherwise look for a professional help to know the root cause and Debug it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page