ATA as a 2nd OBi phone port

<< < (3/3)

rob613:
Thank you for the clarification - I have replicated this using x-lite.
I also have verified that two simultaneous outbound calls can be made through the GV configuration, one from the local phone port and the other through this softphone.

lhm.:
As ObiTalk is down at this time, this setup would by by-pass Obitalk. Has anyone been able pass CID on the inbound to the ATA?

Stewart:
If you enable X_SpoofCallerID for the profile in question (and that doesn't interfere with any other uses of the SPx), caller ID should pass to the other ATA.

Navigation

[0] Message Index

[*] Previous page