September 17, 2019, 04:14:25 pm *
Welcome, Guest. Please login or register.
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
Author Topic: Error in DigitMap,please help me find it!  (Read 2176 times)
Posts: 16

« on: June 26, 2012, 07:41:41 pm »

Hello Everyone!

        I have two OBi(A and B), I want to send number to sp1/OBi(B) in OBi(A).

        I already in OBi(A) set speed dial 3#=OBi(B).

        Now I call 3*xxxx. to sp1/OBi(B), it is OK.

        But I would like to be more simple, use the number 4 instead of 3 *<4:3*>.

        In PHONE Port/OBi(A):




       Configured as above, but the number(4xxx.) is incorrectly sent to sp1/OBi (A).

       If I change <4:3 *> to: <44:3 *>, it is OK, the number(44xxx.) has been successfully sent to sp1/OBi (B).

       So how to solve? I think the more simple dial-up, huh, huh. Wink Wink Wink

       I suspect the problem lies in the (([1-9]x?*(Mpli)), but do not know how to solve it.

       Please give me support and help, thank you.

Pages: [1]
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC