How to setup voice gateway and trunk group for voip.ms

<< < (2/2)

pc44:
Hi nathanyang0428,

I see no one has followed up on your inquiry for some time now, and so I thought I would respond.  I may not be able to resolve your issue(s), but perhaps if we work on it together, we might make some progress.  :)

First, I would change the following:
Voice Gateway3 -> DigitMap -> (xx.)
Physical Interfaces -> PHONE Port -> PrimaryLine -> SP1 Service

That should send US&Canada long distance calls to SP1 without any custom rules.  Then, I would change your OutboundCallRoute from what you have...

{911:sp2},{<1>aaaxxxxxxx:sp2},{<1>bbbxxxxxxx:sp2},{1xxxxxxxxxx:sp1},{011xx.:vg3},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

to

{911:sp2},{<1ABC>[2-9]xxxxxx:sp2},{<1>ABCxxxxxxx:sp2},{<1>(800|888|877|866|855)xxxxxxx:sp2},{1xxxxxxxxxx:sp1},{(011xx.):vg3},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

...where ABC is your local area code.  Now, you should also be able to dial 7-digit numbers for your local calls.

With your existing setup, are you able to dial out using voip.ms when you press the **3 and then the number?  I just want to double-check that your **1, **2, and **3 prefixes work successfully when manually dialed before the desired telephone number.  Obviously, if manually dialing **3 does not function properly, then these other modifications will likely not work either.

Let me know you think,
pc44

Navigation

[0] Message Index

[*] Previous page