Need help on setting my obi110 with freephoneline

(1/2) > >>

epee:
[Repost. Can't find my post.]

I received my obi110 from Amazon yesterday and I tried to set it up with my freephoneline account and failed.

It shows: Register Failed: No Response From Server

For the last 12 hours, i try many many many times, and only sevreal times it work, but after one or two minutes call, it stop working again!

I used Linksys pap2 for many years and it works always. Not sure why obi110 not work with freephoneline..... pls help.

QBZappy:
My OBi is setup this way with FPL. I'm not certain you need all these settings, however it works for me.

ITSP Profile A/B->General->SignalingProtocol = SIP

ITSP Profile A/B->General->SIP-> Everything on this page is set to default except the following:
ITSP Profile A/B->General->SIP->ProxyServer = voip.freephoneline.ca
ITSP Profile A/B->General->SIP->RegistrarServer = voip.freephoneline.ca
ITSP Profile A/B->General->SIP->OutboundProxy = voip.freephoneline.ca

Voice Services->SP1/2 Service->SIP Credentials-> AuthUserName = FPL DID number (include the "1") 15145551212
Voice Services->SP1/2 Service->SIP Credentials->AuthPassword = Whatever

epee:
Thanks QBZappy. I've tried this yesterday, but no luck.

I just tried it again and it seems work now, but in System Status, it shows"Registered (server=208.65.240.165:5060; expire in 35s)". It's this normal? Every 60 second will renew automatically?

Can you check your obi device status for me? Thank you.


SP1 Service Status <<---Freephoneline
Parameter Name   Value   OBiTALK
Settings   
Status   Registered (server=208.65.240.165:5060; expire in 58s)      
PrimaryProxyServer         
SecondaryProxyServer         
CallState   0 Active Calls      


SP2 Service Status <<---Google Voice
Parameter Name   Value   OBiTALK
Settings   
Status   Connected      
PrimaryProxyServer         
SecondaryProxyServer         
CallState   0 Active Calls      



Quote from: QBZappy on May 23, 2012, 03:30:27 pm

My OBi is setup this way with FPL. I'm not certain you need all these settings, however it works for me.

ITSP Profile A/B->General->SignalingProtocol = SIP

ITSP Profile A/B->General->SIP-> Everything on this page is set to default except the following:
ITSP Profile A/B->General->SIP->ProxyServer = voip.freephoneline.ca
ITSP Profile A/B->General->SIP->RegistrarServer = voip.freephoneline.ca
ITSP Profile A/B->General->SIP->OutboundProxy = voip.freephoneline.ca

Voice Services->SP1/2 Service->SIP Credentials-> AuthUserName = FPL DID number (include the "1") 15145551212
Voice Services->SP1/2 Service->SIP Credentials->AuthPassword = Whatever

epee:
Not working! I can only make 15 seconds call and line disconnected. I check the SP1 status it shows:

Register Failed: No Response From Server (server=208.65.240.165:5060; retrying)

PS: I call Freephoneline CSR and they told me their system work great. Their tech also test my account "I have configured your device on a Grandstream HT-286 here in the office and tested some inbound and outbound calls - all are working great".

Maybe I received a bad device....:( If so, how can I return/exchange?

QBZappy:
Try this as well:

SP1 Service->X_KeepAliveEnable = checkmark

Navigation

[0] Message Index

[#] Next page