Need help to setup PSTN for OBI110
mikedib87:
Hi Ianobi
Made those changes and it hasn't resolved the issue.
The tipringvoltage is at 0V.
I'll investigate the connection now.
Just a question, the lead that i'm using connects a BT style connector to a Rj11 connector. It has 4 wires which I believe are crossed on the other end. Should they be straight through?
Thanks for your help
Shale:
Stewart and Ianobi, nice call on the TipRingVoltage....
Mike, try dialing '#', which should connect you to the BT PSTN line. Listen as you wiggle connections around your adapter and at the end of each cable. Any sound that you hear that correlates with the wiggling will identify the location of the intermittent connection which I think your description of your symptoms indicate.
mikedib87:
Hi Shale
Thanks for the reply. I dial # and a few seconds later it hangs up and goes to dial tone. I hear what sounds like someone putting the phone down, then dial tone.
mikedib87:
Also, strangely, when I reboot the obi my phone rings and will continue to ring until i answer it. This then goes dead after a few seconds.
Shale:
Quote from: mikedib87 on May 24, 2013, 09:41:22 am
Hi Shale
Thanks for the reply. I dial # and a few seconds later it hangs up and goes to dial tone. I hear what sounds like someone putting the phone down, then dial tone.
Is that "few seconds" a fixed interval, or is the interval somewhat random? Did you wiggle while listening?
Navigation
[0] Message Index
[#] Next page
[*] Previous page