What about 911?? Your Obi can call a Local Emergency Number when you dial 911
jimates:
Quote from: jimates on April 03, 2012, 08:21:58 pm
Quote from: RonR on April 03, 2012, 08:19:43 pm
Quote from: jimates on April 03, 2012, 07:30:54 pm
ruel,
upgrading the firmware will not affect your changes.
Do you think he's been waiting almost 11 months for that answer? ;D
Maybe. I read every post that comes on the board. Perhaps not every day and at times it has been months between. I may not see a response to one of my posts for a while.
ruel:
um. how about: Maybe Not? eleven months. yeah. maybe not. LOL
the obi works. haven't bothered to upgrade the firmware for a while. sorry, but me don't treat the obi like windows that me need to do updates all the time. anyways, obi has since made it easier to set up 911 with a checkbox in the obi dashboard menus. ended up not using using 411 at all because me would just go to the internet to find 411 info. the only problem that me have is needing to get a new battery for one of my cordless phones and that's not an obi problem.
oh, me got an email notice about the new message in this discussion thread and took a peek around to refresh my memory about what me was asking about. methinks me should unsubscribe from this thread. lol
Ruff_Talk:
Maybe someone can help me here. I am unable to make any changes using the OBI setup wizard. Can someone please point me in the right direction? My set is:
Line 1: GV (Personal line)
Line 2: GV (Business line)
I am looking to ad 911 access by dialing a local 10 digit number. I have the OBI100 device. Any help would be appreciated.
RonR:
Go directly to these settings:
Physical Interfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<911:12125551212>):trunk},{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
where 12125551212 is the non-emergency number and trunk is sp1, sp2, etc.
Ruff_Talk:
Quote from: RonR on May 14, 2012, 10:12:03 am
Go directly to these settings:
Physical Interfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<911:12125551212>):trunk},{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
where 12125551212 is the non-emergency number and trunk is sp1, sp2, etc.
Hey RonR,
Thanks for your speedy response! I found the area you were referring to, however, I am still unable to edit anything on that page. What am I missing?
Navigation
[0] Message Index
[#] Next page
[*] Previous page