What about 911?? Your Obi can call a Local Emergency Number when you dial 911
Ruff_Talk:
disregard last post.
Ruff_Talk:
Hey RonR,
It worked like a charm! Only problem is there is no "emergency 10 digit number" in my area, so the number I have to use is the "non emergency number". It's better than nothing, I guess. Thanks again for your help.
maddawg:
Thank you for the detailed information. Have it setup on Freephoneline, but first tested it by calling my home number. Working good so far. Don't know if I can call our 911 operator in Toronto to test if it works. Just hoping it does.
Lostdog:
I have an Obi 100 with Google Voice on SP1 and nothing on SP2 and wanted to set up 911 to dial the Los Angeles ten digit emergency services line: 213-928-8206
First I tried this, which didn't work. I got the error message: "There is no service to complete your call":
Physical Interfaces -> PHONE Port -> DigitMap:
from
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
to
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
from
{([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
to
{([1-9]x?*(Mpli)):pp},{(<911:12139288206>):trunk},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
After fiddling with various configurations and not knowing what I was doing, I stumbled on to this, which worked:
Physical Interfaces -> PHONE Port -> DigitMap: Back to ObiTALK settings (checked)
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
from
{([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
to
{([1-9]x?*(Mpli)):pp},{(<911:12139288206>):sp1},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
I have no idea what I'm doing, nor why this worked and the other way didn't. I just hope that if you're reading this, and if you are as big an ignorant fool as I am, I managed to save you some time.
hpmoon:
These instructions are horrible and outdated. There is no way to simply disable Auto Provisioning inside the category Auto Provisioning as instructed. There is a multitude of various settings on that Auto Provisioning screen. So the instruction to "disable Auto Provisioning" is totally worthless.
Also, the default string you mentioned for Phone OutboundCallRoute is totally different than what I see on my default, fresh 110, which says, "{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}"
So was the advice "official," or just some hobbyists suggestions?
Navigation
[0] Message Index
[#] Next page
[*] Previous page