Can't restore current configuration

<< < (2/2)

OZOi:
I've compared two files with Beyond Compare and see that the old files (which work) has pretty big section at the end which the new files doesn't have. The section begins with:
    <ParameterValueStruct>
      <Name>UserAgentDomain</Name>
      <Value X_UseDefault="Yes"/>
    </ParameterValueStruct>
    <ParameterValueStruct>
      <Name>OutboundProxy</Name>
      <Value X_UseDefault="Yes"/>
    </ParameterValueStruct>
    <ParameterValueStruct>
      <Name>OutboundProxyPort</Name>
      <Value X_UseDefault="Yes"/>
....

Other differences include different date/time stamps, version numbers, last called numbers, etc. which is pretty much expected.

Why the new files miss that big section? Perhaps that's why I can't restore configuration from them now.

QBZappy:
OZOi,

I just compared config file of my OBi 110 with one from OBi100 with Beyond Compare. My OBi110 has several sections which I think should have been in the OBi100 config as well. Here is an example of a missing section:

 <N>VoiceService.1.X_FXO.1.</N> <------ Header in both unit configs. The body is missing in the OBi100
    <P>
      <N>Enable</N>
      <V X_UD="Y" X_DV="true"/>
    </P>
    <P>
      <N>DigitMap</N>
      <V X_UD="Y" X_DV="(xxxxxxxS4|1xxxxxxxxxx|xx.)"/>
    </P>
    <P>
      <N>InboundCallRoute</N>
      <V>{(x.5145551111|x.5145552222|x.5145553333|x.5145554444):aa($1)},{pp(ob290000000),ph}</V>
    </P>
    <P>
      <N>RingDelay</N>
      <V X_UD="Y" X_DV="4000"/>
    </P>
    <P>
      <N>RingProfile</N>
      <V X_UD="Y" X_DV="A"/>
    </P>
    <P>
      <N>DefaultRing</N>
      <V X_UD="Y" X_DV="1"/>
    </P>
    <P>
      <N>CallOnHoldRing</N>
      <V X_UD="Y" X_DV="8"/>
    </P>
    <P>
      <N>ToneProfile</N>
      <V X_UD="Y" X_DV="A"/>
    </P>
    <P>
      <N>DetectOutboundConnectMethod</N>
      <V X_UD="Y" X_DV="Assume connected after a short delay"/>
    </P>
    <P>
      <N>DialDelay</N>
      <V X_UD="Y" X_DV="500"/>
    </P>
    <P>
      <N>DialDigitOnTime</N>
      <V X_UD="Y" X_DV="200"/>
    </P>
    <P>
      <N>DialDigitOffTime</N>
      <V X_UD="Y" X_DV="200"/>
    </P>
    <P>
      <N>DirectoryNumber</N>
      <V X_UD="Y" X_DV=""/>
    </P>

Don't know what to make of it. You might try copying the missing section and restoring the modified BKUP. DO IT AT YOUR OWN RISK.

OZOi:
I've just copied missed part to the latest config file (which did not work before, created today) and now it can be used to restore configuration. Perhaps the bug is there...

Looks like that the other differences include different date/time stamps, version numbers, last called numbers, etc. are not important at all.

So, from that I may conclude that the latest backups created by OBi100 v1.3.0 (Build: 2711) can't be used to restore configurations, unless one modifies them manually... It's not good, not good at all... :(

How to keep account password within configurations file?

QBZappy:
OZOi,

Just curious. What OBi model are you having problems with? The OBi 100 or the 110? My Obi 100 config seems to not be a complete copy of the settings in the unit. I had never bothered to check this.

OZOi:
It's OBi100. I don't have OBi110 on my hands.

I think you'd agree that the purpose of config backup is to be able to restore that configuration some day later. And that's exactly what I'm trying to do right now. I want to load two different configurations created today interchangeably. And I can't do that... So, "Backup Configuration" feature has been lost with some firmware update.

I agree that config saved as a backup copy should reflect full set of configuration options. It's important, or the backup functionality is lost or not supported...

Navigation

[0] Message Index

[*] Previous page