Dial plan explanation
coolclay:
My voip provider does strange things when caller id is blocked.
my concern is if call id block is active when calling 911.
my provider uses a northern 911 service which will not see my location if call id is blocked.
how do I disable it for 911 calls?
I have been trying to do a replacement string with no success.
Codes for unblock are *82 and *68(one time)
<911:*68S1911> which does not work
i have been using my cell number to test with and replacing the second 911 with my cell number.
How do I actually accomplish this?
dima_nyc:
I wonder if one of the Guru's can help me with complicated dial plan:
Obi202 (500 333 ***)
Line 1
GV
• outgoing calls beginning with "1" following 10 digits (xxxxxxxxxx)
• 7 digit number will have automatically added 1(212) or (212) US area code
•
Line 2
Callcentric
• direct incoming calls and forwarded from GV, call out to callcentric 1777
•
Line 3 primary line
SIP Telphin (acct # 1, no incoming sip number)
• outgoing calls beginning with "8" following 10 digits (xxxxxxxxxx) "8" retained
• "011" dialed, it replaced with "810" (its equivalent of "+") and then any nuber of digits international number
• 6 digit number will have automatically added 84862 before (xxxxxx)
•
Line 4
Direct connection to Obi110 (200 222 ***)
• Incoming and outgoing calls direct connection to POTS line of Obi110 (200 222 ***) (outgoing calls can begin for example with "9" dial tone).
• Incoming calls special ring.
Obi100 (300 314 ***)
Line 1
GV primary line
• outgoing US calls (with or without "1")
• 7 digit number will have automatically added 1(212) or (212) US area code
Line 2
Callcentric
• direct incoming calls and forwarded from GV
Additional:
when "011" dialed, call being routed via Obi202 (500 333 ***) Line 3 - SIP Telphin with "011" replaced with "810" following any number of digits international number
Obi110 (200 222 ***)
Line 1 primary line
SIP Telphin (acct # 2, no incoming sip number)
• outgoing calls beginning with "8" following 10 digits (xxxxxxxxxx) "8" retained, no modification
• calls beginning with "810" following any number of digits dialed without modification
• 6 digit number will have automatically added 84862 before (xxxxxx)
• outgoing calls beginning with "1" following 10 digits (xxxxxxxxxx) have "810" added before "1" (8101xxxxxxxxxx) - US number
Line 2
Callcentric
• direct incoming calls and forwarded from GV, call out to callcentric 1777
POTS line
direct connection to/from Obi202 (500 333 ***) Line 4 to/from POTS line
Any assistance is greatly appreciated!
Since RonR was evicted from forums not much hel with complex issues
JSmith:
Hi,
You may also check this video on what dial plan is. It is based on Ozeki Phone System XE and it fairly explains dial plan and VoIP:
http://www.ozekiphone.com/product-information-340.html
BR
Ostracus:
Quote from: JSmith on October 12, 2012, 06:19:12 am
Hi,
You may also check this video on what dial plan is. It is based on Ozeki Phone System XE and it fairly explains dial plan and VoIP:
http://www.ozekiphone.com/product-information-340.html
BR
Well "what is a dial plan" is pretty easy. It's when one gets to the nuts and bolts level is things get more complicated.
zapattack:
I need help with a simple question: using Outside Dial tone.
Present configuration:
Line - for 3 and 7D special service calls, with direct # access.
SP1 - for GV
SP2 - (default) for all 10D, 11D and 011 calls.
I would like to dial an access code other than **1, such as '48' (GV), get
Outside Dial tone, then continue. Where would I put {t=od}?
Navigation
[0] Message Index
[#] Next page
[*] Previous page