Dial plan explanation
murzik:
I’ve tried both with S0 and without, makes no difference, but using # at the end always make number to be dialed much faster.
(1xxxxxxxxxx|<1aaa>[2-9]xxxxxx) is my complete digimap for GV, this is my secondary lane, but I have outbound rule set to be {(1xxxxxxxxxx|<1aaa>[2-9]xxxxxx):sp2}, so I do not have to use **.
RonR:
The routes in your PHONE Port OutboundCallRoute do not come into play here (other than routing the call out the desired port).
I'm assuming the '(1xxxxxxxxxx|<1aaa>[2-9]xxxxxx)' DigitMap is in ITSPA, ITSPB, or LINE. Unless your PrimaryLine points to the one that has this DigitMap, it will never be evaluated unless you use **1, **2, or **8 to access it. My guess is that S0 has no effect because the DigitMap you're modifying is never being used.
murzik:
Quote from: RonR on March 19, 2011, 04:48:35 pm
I'm assuming the '(1xxxxxxxxxx|<1aaa>[2-9]xxxxxx)' DigitMap is in ITSPA, ITSPB, or LINE. Unless your PrimaryLine points to the one that has this DigitMap, it will never be evaluated unless you use **1, **2, or **8 to access it. My guess is that S0 has no effect because the DigitMap you're modifying is never being used.
Digimap is always in use.
for example I have Digimap '(1xxxxxxxxxx|<1aaa>[2-9]xxxxxx)' for ITSPB and (011xx.|*xxx) for ITSPA, if I will remove '(1xxxxxxxxxx|<1aaa>[2-9]xxxxxx)' and just leave Digimap emty, then I am not able to make calls to US.
RonR:
Is your PHONE Port DigitMap at the default value?
Where is your PrimaryLine set to?
What is the DigitMap on your PrimaryLine?
Which SPx uses with ISPB?
Are you simply dialing test numbers without any **? (such as 12345678901 and 2345678)?
murzik:
Yes. Phone Port Digit Map at the default value.
Primary line is set to SP2.
DigitMap for the primary line is (011xx.|*xxx.|xxx.)
SP2 is in use with ITSPB. SP2 is my sip provider.
SP1 with ITSPA set to Google voice.
DigitMap for ITSPA (1xxxxxxxxxx|<1aaa>[2-9]xxxxxx)
I am simply dialing numbers without **. Because I have rule set on Phone port { (1xxxxxxxxxx|<1aaa>[2-9]xxxxxx):sp2}
Navigation
[0] Message Index
[#] Next page
[*] Previous page