Dial plan explanation
Cruize:
I have GV on SP1 and my VOIP on SP2. I have set SP2 as my default line, but I want to pick SP1 for all calls to US numbers.
I currently have the following OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
How should I change this to accomplish what I want?
RonR:
Why did you make the changes you did to your PHONE Port OutboundCallRoute? Normally, no changes are required to it.
With SP2 set as your PrimaryLine, you can cause US/Canada calls to go out SP1 with the following change to your ITSPB DigitMap:
(<**1>1xxxxxxxxxx|<**11>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
TomTN:
Hi everybody,
I need help to create the dial plan following this (Obi 110 box):
Obi 110 firmware version: 1.2.1 (just updated tonite)
All calls local, long distance, and toll free are 10 and 11 digits only.
Primary line: --> PSTN
911 --> PSTN
407, 321 area code : 10 digits --> PSTN
toll free 800,888,877,866,855: 11 digits --> PSTN
international: --> PSTN ( occasionally calling)
other area codes: (long distance) 11 digits --> Google voice (SP 1)
For long distance, I am not sure 10 digits will work or not,
but to make it consistent, I follow 11 digits like calling those toll free numbers.
Extra question:
when dial long distance, can home phone number (PSTN line) be shown instead of Google voice number?
Thanks
TomTN.
RonR:
TomTN,
I haven't tested this, so there could be a surprise or two somewhere:
Physical Interfaces -> LINE Port -> DigitMap:
(321xxxxxxx|407xxxxxxx|1800xxxxxxx|1888xxxxxxx|1877xxxxxxx|1866xxxxxxx|1855xxxxxxx|011xx.|
<**1>1xxxxxxxxxx|<**11>xxxxxxxxxx)
On long distance calls through Google Voice, 10- or 11-digits may be dialed.
Google Voice does not permit the CallerID to be changed.
TomTN:
Thanks for your quick help, RonR.
As you said, there are some surprise.
911: not tested, but add "|911|" to the digital map anyway
611, 511, 411: working (add "|611|511|411|" to the digital map)
long distance: 11 digits or 10 digits : working
toll free: 11 digits or 10 digits : working
Here are some problems:
calls to 407 local area code: sometimes recieving error msg
"We are sorry your call did not go through". But, If I try to dial it again the 2nd, the 3rd, or the 4th time, the call will eventually go thru.
calls to 321 area code numbers: if 321 exchanges are local, then the call go thru.
if 321 exchanges are local toll or long distance, then need to dial them as long distance call; otherwise recieving msg "we are sorry. when placing local call, it's neccessary to dial 1 plus area code plus seven digits number to complete this call."
Are there anything we can improve?
Thanks
TomTN
Navigation
[0] Message Index
[#] Next page
[*] Previous page