Dial plan explanation
RonR:
Physical Interfaces -> LINE Port -> InboundCallRoute : {SP1(12341234567)}
Voice Services -> SP1 Service -> X_InboundCallRoute : {12341234567:li},{aa}
Voice Services -> Auto Attendant -> UsePIN : (checked)
Voice Services -> Auto Attendant -> PIN1 : (numeric PIN)
where 12341234567 is US cell_phone1.
Stewart:
Quote from: Albert on February 02, 2012, 07:59:30 pm
Incoming call to Obi's PSTN port have to be transferred to my US cell_phone1, without pause or PIN access just blind transfer to my cellphone ...
Though RonR's solution will do exactly what you asked for, it seems like a very unusual request, because your friend would be unable to receive calls at home! Is this an "extra" line that she doesn't presently use, e.g. it's bundled with her Internet and TV service, but she takes all calls on her cell phone? Otherwise, please post details, as there may be a better way to accomplish your goals.
Albert:
Dear.
I used config from RonR and everything Great.!!.
Only inbound call from PSTN to SP1 no blind forward.
I used:
Physical Interfaces> LINE> InboundCallRoute> SP1(US cell_phone1)
After 7 ring call inbound throw PSTN finaly bridge to US cell_phone1 but call hang-hook continued a unknown number ring and hang-hook again
What could be wrong?
RonR:
Quote from: Albert on February 04, 2012, 09:33:23 am
After 7 ring call inbound throw PSTN finaly bridge to US cell_phone1 but call hang-hook continued a unknown number ring and hang-hook again
I don't know what this means. I'm not familiar with the term 'hang-hook'.
In my previous example, I did leave out the curly-braces that should be around the rule:
Physical Interfaces -> LINE Port -> InboundCallRoute : {SP1(12341234567)}
should work. I use that here to forward incoming landline calls to my cell phone.
-----
Upon further review, either should work equally well:
Physical Interfaces -> LINE Port -> InboundCallRoute : SP1(12341234567)
or
Physical Interfaces -> LINE Port -> InboundCallRoute : {SP1(12341234567)}
Curly-braces are not required when there is only a single rule.
Albert:
Dear
I can't forward Incomng PSTN call to Google Voice
I've configured OBI for Google Voice (SP1), and make outgoing calls, blind forward from GV to Line port with no problem. Everything is great.!!
SP1 Services> X_InboundCallRoute> {cell_phone:li},{aa}
When Inbound call is connected throw PSTN port, it can't forward to Google Voice (SP1). The phone (PSTN) continues to ring and not forward to GV
Line Port> InboundCallRoute> SP1(cell_phone)
Somebody have any idea why not forward?
Regards
Albert
Navigation
[0] Message Index
[#] Next page
[*] Previous page