I have PSTN line in Canada and my VOIP provider located in Ukraine and mapped to SP2. I'm trying to setup the rule: prefix 8044 going to SP2 and 8044 substracted from #. Here is my settings:
Phone Port ->OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<8044:>(Msp2)):sp2},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
ITSP Profile B -> DigitMap:
(<8044:>xxxxxxx|xxxxxxx)
LINE Port-> DigitMap:
(xxxxxxxS4|1xxxxxxxxxx|xx.)
Works Ok, but it's a long delay before phone start ringing. I was following Ron's suggestions and changed Line Digimap to
[2-9]11|416xxxxxxx|905xxxxxxx|647xxxxxxx|289xxxxxxx|1xxxxxxxxxx|3xxxxxx|011xxxxxxxxxxxx)
After this change all calls started with 8044 are not going to SP2 at all. Any help?