setup 110 with dialing rules
wcnngt:
I just came back in town and tried the battery toggle, it works like a charm. Now it has all the functions that I need. Thank you all very much.
One more question, I have 911 service with callcentric and checked "Use This Service for Emergency 911 Calls" in its configuration page. Will it work with the trunk group setup?
OBI is so capable, maybe I should try to connect my fax machine and get it to work.
ianobi:
wcnngt,
Check your Phone Port OutboundCallRoute. I guess when you set up 911 on Callcentric, then the OBI placed a {(911):sp2} rule there instead of the default sending out to li. In this case your trunk group does not come into play as it consists of li,sp1.
I have a very similar set up to you, using the Xlink to link mobiles into the line port. After discovering the "toggle battery" option I set up the same tg as you:
Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> TrunkList -> li,sp1
Here the emegency numbers are 999 & 112. Now in my Phone Port OutboundCallRoute I have a rule ...,{(999|112):tg1},...
This means that 999 will go out to line and my mobile phones first. If both mobiles are out of the house (but someone is still at home!) then 999 will go to sp1 which is Sipgate.co.uk, which is also set up for 999.
This means a trunk group can give you a back up to your normal emegency service, but it needs to be set up with care.
I believe RonR has a post here somewhere that shows a 911 with two backup routes using a trunk group.
wcnngt:
I checked Phone Port OutboundCallRoute, the obitalk default is checked. I would like 911 calls to go through sp2 (cellcentric). The reasoning is that cell phones won't give out the exact location while the 911 service in cellcentric has a registered physical address.
So my need is to keep all the rules previously setup but also let sp2 handle 911 calls. I wish I can try the 911 calls.
jimates:
go to your dashboard
click on the number on the left for your Obi
click on the gear icon to the right of sp2
check the box "Use This Service for Emergency 911 Calls "
Obitalk will change the call route for your 911 to sp2
wcnngt:
That's what I did. Just want to make sure this won't interfere with the rules I setup below:
"Service Providers -> ITSP Profile A -> General -> DigitMap -> Revert to default (place check in Default)
Physical Interfaces -> PHONE Port -> PrimaryLine -> Trunk Group 1
Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> TrunkList -> li,sp1
Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> DigitMap -> ((CELL_PHONE_ONE|CELL_PHONE_TWO|CELL_PHONE_THREE)|<**11ABC>[2-9]xxxxxx|<**11>[2-9]xxxxxxxxx|<**1>1xxxxxxxxxx|<**2>011xx.)"
Navigation
[0] Message Index
[#] Next page
[*] Previous page