setup 110 with dialing rules
pc44:
Quote from: wcnngt on June 11, 2012, 02:12:34 pm
I tried the first setup and it works perfectly. Thank you so much.
You mean it worked?? :o
Okay, let's try the next feature you want and see what happens. I'm still learning how to reference the trunk groups from within the digit map. Let's give this a try.
Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> TrunkList -> li,sp1
Then, change your Service Providers -> ITSP Profile A -> General -> DigitMap to
((CELL_PHONE_ONE|CELL_PHONE_TWO|CELL_PHONE_THREE):tg1|<1ABC>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|<**2>011xx.)
Test and let me know what happens,
pc44
wcnngt:
I tried it. International and US numbers work. But if I dial cellphone, it is not going through PSTN. Any thoughts?
pc44:
Hmm, maybe we need to change the DigitMap also for Trunk Group 1:
Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> DigitMap -> (xx.)
If not, we'll try another route,
pc44
wcnngt:
I tried adding the new trunk digitmap. dialing cellphone still goes through GV. What's your other route?
Thanks.
pc44:
Hmmm... we are not striking gold here.
Here is the other route... it's messy though:
Service Providers -> ITSP Profile A -> General -> DigitMap -> Revert to default (place check in Default)
Physical Interfaces -> PHONE Port -> PrimaryLine -> Trunk Group 1
Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> TrunkList -> li,sp1
Voice Services -> Gateways and Trunk Groups -> Trunk Group1 -> DigitMap -> ((CELL_PHONE_ONE|CELL_PHONE_TWO|CELL_PHONE_THREE)|<**11ABC>[2-9]xxxxxx|<**11>[2-9]xxxxxxxxx|<**1>1xxxxxxxxxx|<**2>011xx.)
That should route everything through Trunk Group 1, which should try the PSTN first before failover to GV. US 7, 9, and 10-digit numbers should go through your SP1, and international should go through SP2.
If anyone else sees any problems/mistakes in my configuration, please let me know! :)
Thanks,
pc44
Navigation
[0] Message Index
[#] Next page
[*] Previous page