Calling Home (OBI 100) from my Cell Phone, does not allow

[pc44]

Hi DonB,

Here's just one tweak (there are many others from the many OBI gurus on this board).

This one I copied and pasted straight from a Ron post:

You might try changing the OBi Ethernet port from 10 mb/s half-duplex to 100 mb/s full duplex to see if that helps:

1. Dial *** 0

2. Enter option 27 and press #

3. Press 1 to set a new value

4. Enter a value of 1 and press #

5. Press 1 to confirm/save

6. Hang up

7. Wait for the OBi to reboot

[DonB]

Kool is this for the garble, and how would I change it back if need be, I like always to have the option to revert things back if there are any issues, and does option tweak only get change by the phone, is it possible to do this tweak from the OBI panel board ?? If you don't know, let me know who Ron is and I will send him a message, TIA

Hi DonB,

Here's just one tweak (there are many others from the many OBI gurus on this board).

This one I copied and pasted straight from a Ron post:

You might try changing the OBi Ethernet port from 10 mb/s half-duplex to 100 mb/s full duplex to see if that helps:

1. Dial *** 0

2. Enter option 27 and press #

3. Press 1 to set a new value

4. Enter a value of 1 and press #

5. Press 1 to confirm/save

6. Hang up

7. Wait for the OBi to reboot

[ianobi]

DonB,

This explains more:

http://www.obitalk.com/forum/index.php?topic=2164.msg13631#msg13631

To revert back press 0 at item 4 in the list.

ianobi

[DonB]

Thanks for the info, OK I guess I am looking for a tweak for the garble sound we get once in a while

DonB,

This explains more:

http://www.obitalk.com/forum/index.php?topic=2164.msg13631#msg13631

To revert back press 0 at item 4 in the list.

ianobi