Is there any block list?
dealyanodeal:
just wanted to clarify a few things
The 720####### used in first rule and 2nd rule are actually two different 720 numbers. So if i am calling from the 2nd 720 number then it will not match the first rule.
Before using the cell phone with suppressed caller id for anonymous call block, i used the same for the first rule(i mentioned in my earlier post). I suppressed the caller id and called from the cell which would normally get forwarded to AA. With caller id suppressed, it didnt go to AA and that made me believe that i can use supressed caller id for anonymous call block test. I could be wrong but if it worked for 1st rule then it should work for 2nd rule too.
MichiganTelephone:
Quote from: dealyanodeal on March 16, 2011, 11:31:02 pm
I could be wrong but if it worked for 1st rule then it should work for 2nd rule too.
That's what I'd think as well. You might want to send an e-mail to Obihai Support and see if perhaps there's a bug in the handling of the ? — I'm not saying there is, but they might be able to help you test it and discover the problem, since according to the documentation it should work.
RonR:
Quote from: dealyanodeal on March 16, 2011, 11:31:02 pm
just wanted to clarify a few things
The 720####### used in first rule and 2nd rule are actually two different 720 numbers. So if i am calling from the 2nd 720 number then it will not match the first rule.
You mentioned in an earlier posting that you were using 2 cells phones, so I assumed the two 720xxxxxxx were different and you were testing as you described.
Quote from: dealyanodeal on March 16, 2011, 11:31:02 pm
Before using the cell phone with suppressed caller id for anonymous call block, i used the same for the first rule(i mentioned in my earlier post). I suppressed the caller id and called from the cell which would normally get forwarded to AA. With caller id suppressed, it didnt go to AA and that made me believe that i can use supressed caller id for anonymous call block test. I could be wrong but if it worked for 1st rule then it should work for 2nd rule too.
I got a little lost about who's on first and what's on second, but I think you'll find everything is probably working OK. Just remember to order your routes carefully if more than one might match, and to use parenthesis around multiple rules within a route before you get to the ':'.
Pretty neat stuff, eh?
QBZappy:
Can someone define the "?" param = anonymous calls
Unknown number
Out of area
What???
RonR:
Probably anything other than a numeric number is considered anonymous.
Navigation
[0] Message Index
[#] Next page
[*] Previous page