What is the default pin on OBi110
Ostracus:
Obi Dashboard. Anyway if your Obi110 status is green, then you should be able to enter a 4 digit numeric PIN.
Stewart:
The password requested is the admin password for the device, not the AA PIN. The default is "admin" but check the OBiTalk portal for a changed setting. Use the keys corresponding to letters, e.g. 23646 for admin.
If that doesn't work, temporarily set a compatible static IP address in your PC and access it via the web interface.
If that doesn't work, either, you will have to do a hardware reset to recover. With luck, you will have a config backup, otherwise you'll need to re-enter all settings.
JohnBowler:
Ah, thanks; I ran into the same problem two days ago. I know the web password (which I had changed and is non-numeric) and I know the A PIN (which I had also changed, to numbers), but when the thing asked me for the password it was most unclear that it wanted the web admin password.
So the mapping of alpha to digit is the US one, I assume, but what happens if the web admin password has non-alphanumerics? I just set my too:
"foobar"
(with the double quotes); what are the corresponding numbers? (The temporarily changed password worked fine when I logged in from the LAN; BTW, my device is set not to allow access from the Internet :)
John Bowler <jbowler@acm.org>
pc44:
Quote from: JohnBowler on June 21, 2012, 04:47:54 pm
"foobar"
(with the double quotes); what are the corresponding numbers?
Try 366227.
Hope it works!
pc44
JohnBowler:
There are six points in:
366227
There are 8 in:
"foobar"
Did you forget the two ", or are you saying that the attendant simply ignores non-alphanumeric?
John Bowler <jbowelr@acm.org>
Navigation
[0] Message Index
[#] Next page
[*] Previous page