Disconnect detection in Spain

(1/2) > >>

f3d3:
Hi,

I am in spain with a PSTN line from Movistar and disconnect detection is
taking about 20 seconds.

Everything is set to default exept:
DisconnectTonePattern 425-18;10;(.25+.25) / have also tried 425-30;4;(.25+.25)
 
SilenceTimeThreshold 1800

I am running 1.3.0 (Build: 2711)

Thanks

Stewart:
I could not find a definitive answer, but try:
425-30;10;(.2+.2,.2+.2,.2+.6)

If no luck, post a recording of about 10 seconds.

If you have trouble attaching a file in this forum, upload it to a sharing service and post the link.

QBZappy:
Found this:

Disconnect tone Spain : 425@-10,425@-10;4(.2/.2/1,.2/.2/1,.2/.6/1)

http://www.voipnovatos.es/item/2005/12/gua-configuracin-pstn-del-spa-3000

¿Guía configuración PSTN del XXX XXXX? <- Competitor, don't tell

Stewart:
Quote from: QBZappy on June 22, 2012, 03:10:30 pm

Disconnect tone Spain : 425@-10,425@-10;4(.2/.2/1,.2/.2/1,.2/.6/1)
I believe that's likely correct, but it's for a Sipura/Linksys/Cisco ATA.  The OBi uses a different syntax.

f3d3:
Hi,

Just tried 425-30;10;(.2+.2,.2+.2,.2+.6) and same thing...

Is there a syntax translate guide or tool for SPA -> Obi?

Thanks to all for your help

Navigation

[0] Message Index

[#] Next page