Incoming call from sp1(Obi100) by Obitalk forward to another OBi110 !

(1/3) > >>

AlexSun:

Hello Everyone!

       I have Obi110(200111111) and Obi100(300333333), I hope that incoming call on Obi100 forward to Obi110 by Obitalk.

       But I encountered some problems, hope you will help me.

       OBI100 set: SP1 Service ---- X_InboundCallRoute: {PP(200111111)}

       OBI110 set: OBiTALK Service  ---  InboundCallRoute: {300333333:aa},{ph}
----------------------------------------------------------------------------------

       Problem:

       When an incoming call(caller id:700123456), incoming call from SP1/OBI100 directly to the aa/OBi110, why not PHONT port? aa auto-answer, phone the port without any response.

       I have set (OBI110 the set: OBiTALK Service --- InboundCallRoute: {300 333 333: aa}, ​​{ph}), Why aa response to the call Id: 700 123 456.

       I read a lot of information can not be solved, I hope someone can help solve, thank you.
       
       
       

pc44:
Hi AlexSun,

If you want all incoming calls on the OBI110 to go to your Phone Port, why don't you try this:

OBI110 set: OBiTALK Service  ---  InboundCallRoute: {ph}

Now, calls that go to the OBI110 should go directly to your Phone Port.

Test it out and let us know,
pc44 :)

AlexSun:
Quote from: pc44 on June 24, 2012, 07:49:07 am

Hi AlexSun,

If you want all incoming calls on the OBI110 to go to your Phone Port, why don't you try this:

OBI110 set: OBiTALK Service  ---  InboundCallRoute: {ph}

Now, calls that go to the OBI110 should go directly to your Phone Port.

Test it out and let us know,
pc44 :)


Thanks for pc44 reply!

OBI110 set: OBiTALK Service  ---  InboundCallRoute: {ph}-- incoming call to PHONE port this will work!

But I also hope obi100 call Obi110 (200111111) to reach aa of Obi110, how to solve?

pc44:
Hi AlexSun,

I don't really know the best way to do this, but here is only a thought.

You could try enabling X_SpoofCallerID on the OBI100.

Then, change the InboundCallRoute on the OBI110 back to {300333333:aa},{ph}
...where 300333333 is the Obitalk number of your OBI100 device.

Don't know if that will work, but it is a theory you could test, if you think it makes any sense. :)

pc44

AlexSun:
Quote from: pc44 on June 24, 2012, 08:44:32 am

Hi AlexSun,

I don't really know the best way to do this, but here is only a thought.

You could try enabling X_SpoofCallerID on the OBI100.

Then, change the InboundCallRoute on the OBI110 back to {300333333:aa},{ph}
...where 300333333 is the Obitalk number of your OBI100 device.

Don't know if that will work, but it is a theory you could test, if you think it makes any sense. :)

pc44


Hi pc44

If OBI110 set: OBiTALK Service  ---  InboundCallRoute: {300333333:aa},{ph}, incoming call (700 123 456) will reach to aa/OBi110, OBi100 call **9200 111 111 also reach to aa/OBi100, PHONE Port don't ring.

Thanks for your reply!

Navigation

[0] Message Index

[#] Next page