Are Obi devices limited to the number of endpoints?
Chuck_in_ABQ:
Thanks for the detailed setup. I have created multiple ObiTalk accounts. My "main" account was connected last to the Obi 202.
ObiOn apps ring find on incoming, but they do not single-step dial out. Why? Because it appears that now Obitalk site deletes the Gateway when I delete the device. I went back and tried again, being sure to select the gateway on the soft phone. Delete the Obi 202, and the gateway disappears.
Perhaps I am missing a step? Or did they change something?
I am changing within the ObiTalk web site, not logging directly into the device.
Thanks
Chuck
QBZappy:
Quote from: Chuck_in_ABQ on December 23, 2012, 09:44:28 pm
Delete the Obi 202, and the gateway disappears.
Perhaps I am missing a step? Or did they change something?
The **5 registration sets up the unit to act as an OBiAPP gateway. Delete the device from the portal, and you remove the gateway. Its always been like that. Note that each **5 registration offers a new unique OBiAPP number.
Chuck_in_ABQ:
I can see that now (although upon new **% registration, it thankfully gave me back the same ObiTalk unique number).
According to Jimates post:
Add to an Obitalk account, set the default gateway for the softphone, then delete the device and reset it. The default gateway setting stays with the softphone number.
shampoo, rinse, repeat.
It appears to me (I am still trying again), that "Circles of Trust" are perhaps a newer system to do this same thing? I was able, through COT, to get the gateway proper in all of the obitalk accounts. Now I have to re-enter the various codes that Jimates suggests. BTW, are there other cahnges to these codes? I have not done an exhaustive search, found Jimate's postings and thought I was golden.
Thanks
CHuck
QBZappy:
Chuck_in_ABQ,
What matters is what you find in the OBi inbound settings. Anytime you set up a new device on the portal, you may not have noticed that the COT numbers of the devices were rewritten into your unit in the inbound call routes. This too is nothing new about the behavior of the OBi. Your understanding of it is new.
Chuck_in_ABQ:
Well, its all new to me, had Obi for 2 days now. Major learning curve.
I was able to get all the accounts working using COT, linked to my gateway. Now my wife's Android and daughter's ipod work! It appears, unlike original instructions, I do not have to load the device into each account, but just invite each account into COT, then select my obi as the gateway.
Could not have even started without this forum, thanks all!
Chuck
Navigation
[0] Message Index
[*] Previous page