Nymgo on OBi100

<< < (4/4)

QBZappy:
cyclops,

Yeah, that's what I said.  :D

Glad it worked out for you. FYI if you look in your OBi settings you will see that what you did affected the inboundcallroute to show something like: {your cell number:aa}

That's the only way you can be sent to the AA.

cyclops:
Cheers!   ;D

cyclops:
So now that GV is officially gone, I did the following setup which works for me so far. Just putting it here for my future reference and everyone's benefit. Special thanks to giqcass and sdb- for the tips

1. Created a LocalPhone account
2. Got an IPKall number
3. Setup SIP URI on IpKall as LocalPhoneSipID @ localphone.com
4. Setup the LocalPhone account as SP1 on Obi
5. Added the IPKall number to Google Voice for call forwarding
6. Added the IPKall number to LocalPhone account for spoofing
7. Cheers!

If you are facing DTMF issue (keypress not detected) while verifying your IPKall number with Google Voice, do the following steps (courtesy Thro@SlickDeals) -

1. Log into http://www.obitalk.com/obinet/login/
2. Cick "Home" (above SP1) -> Obi Expert Configuration -> Enter Obi Expert
3. On the left side click "Service Providers" then choose "ITSP Profile A General" (for SP1) or "ITSP Profile B 4. General" (for SP2) depending where you setup vestalink.
5. "DTMFMethod" uncheck "OBITALK settings" then choose "InBand" from the dropdown menu below "Value"
6. Click "Submit"

cyclops:
Update: IPKall was giving troubles with the caller id, so now I'm using Callcentric instead of IPKall. All other steps remain the same.. So far so good..

Steps -
Callcentric>>My Account>>DID Forwarding>>Select phone and hit Edit>>Select This Number Radio Button and enter localphoneSIPid@localphone.com

cyclops:
Update: Since Localphone requires 00 instead of 011 for international calls, I had to change the digimap in Service Providers>>>ITSP Profile A>>>General.

From - (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**2>011xx.|xx.|(Mipd)|[^*#]@@.)

To - (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<011:**200>xx.|xx.|(Mipd)|[^*#]@@.)

Many thanks to azrobert who resolved this on the other thread I posted. Updating here for future reference.

Navigation

[0] Message Index

[*] Previous page