Nymgo on OBi100
QBZappy:
Are you using the OBi portal or the web unit to configure?
cyclops:
I am logged on to http://www.obitalk.com and making the changes. Is there some other way to do it as well? Does it matters?
cyclops:
Quote from: QBZappy on June 29, 2012, 04:32:56 pm
cyclops,
Service Providers->ITSP Profile B->General->DigitMap =
Default:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
Change to:
(<**2>[011]x.|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
Its not working :( probabaly I am doing something wrong.
I have edited the field and it has the following value now, but still when I dial 011 and the international number, it is connecting the call through Google Voice and not Nymgo.
(<**2>[011]x.|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
What can be wrong?
QBZappy:
cyclops,
(This should be put on a label and attached to the OBi)
There are pros and cons of using the portal or the unit interface. I'll let you read up on it.
Managing Your OBi Device Configuration: OBiTALK or OBi Web Page but NOT Both
http://www.obitalk.com/forum/index.php?topic=61.msg109#msg109
If you use the portal try looking in the "OBi Expert Configuration Menu". These settings are also located there. After making the changes there it sends it to the unit (if you have left things as default). The unit should reboot after you "Submit" any change on the portal.
After making changes via the portal, always check the unit itself and confirm that the changes which you made are reflected on the unit after the reboot. The unit settings are the only settings that matter.
QBZappy:
cyclops,
Make sure you use Profile A for GV and Profile B for the sip acct.
Navigation
[0] Message Index
[#] Next page
[*] Previous page