Swedish caller ID

<< < (2/4) > >>

Stewart:
Try changing Line Port -> RingDelay from 4000 to 6000.

Kacper:
Quote from: Stewart on July 05, 2012, 09:15:23 am

Try changing Line Port -> RingDelay from 4000 to 6000.



That didn't help. Thanks though. I think there is something wrong with the CallerIDTrigger function, because the phone only rings when "After first signal" is selected. It shouldn't be like that, should it?

QBZappy:

What is your setting here:

Physical Interfaces->PHONE Port->Port Settings->CallerIDDetectMethod

Kacper:
Quote from: QBZappy on July 05, 2012, 09:32:16 am


What is your setting here:

Physical Interfaces->PHONE Port->Port Settings->CallerIDDetectMethod


CallerIDMethod: DTMF (Finland, Sweden)
CallerIDTrigger: (My guess is "Before first ring" but then the phone doesn't ring)

QBZappy:
Kacper,

I know there have been successful OBi implementations in Sweden. You may spend some moments searching the forum for others who have set it up in that environment.

By the way you have not mentioned the OBi model you are trying to set up.

PS
Just for fun, try different combinations of CallerIDMethod & CallerIDTrigger types. Otherwise I suggest you send Obihai support a quick email. I'm sure they must be taking note of configurations in different countries.

Navigation

[0] Message Index

[#] Next page

[*] Previous page