Ecocaller SIP
jerome:
Hello, I just signup for Ecocaller www.ecocaller.com they actually give you $1 to try, I can make it work with xlite, but not with my obitalk obi110, any help is appreciate.
Thank you.
Jerome
Stewart:
How can you expect any help, when you don't say what's wrong?
Does the OBi register to Ecocaller? If not, what does System Status show for the SPx in question?
If yes, what do you hear when you try to call? What does the history show? Does the called phone ring? If so, is there audio in either direction?
jerome:
Right ....here it is:
my configuration:
SP1 Google Voice™ Connected
SP2 (Optional) Generic Service Provider Registered
SP2:
Configuration Name : Generic Service Ecocaller
Make This the Primary Line to Call Out from: yes
Voicemail Notification(Optional): yes
7-Digit Dialing for USA & CAN (Optional)
Enter Area Code e.g. "212"
Use This Service for Emergency 911 Calls
When 911 is called via the OBi this service will be used.
Check only if you are sure this service is capable of placing and receiving emergency service calls.
Service Provider Proxy Server: sip.ecocaller.com
Service Provider Proxy Server Port: 5060
Outbound Proxy Server: sip.ecocaller.com
Outbound Proxy Server Port: 5060
User Name: xxxxxx
Password : xxxxx
URI : no
when call Obi says: the number xxxxx dial is not recognise by the service provider reason 400
Thank you
Stewart:
A 400 means "bad request", which usually indicates a problem with the format of the SIP request. Check the Call History to confirm that the OBi is sending 00 + country code + number. If so, my guess is that the server is incompatible with something the OBi is sending. SIP Debug may show (in the 400 response) a clue as to what is wrong.
Otherwise, you might try "laundering" the connection through a free PBXes or Sonetel accounts, which would "shield" the Ecocaller server from the details of the OBi's protocol.
QBZappy:
jerome,
Please show an example of the number you are dialing when you get the error 400.
Navigation
[0] Message Index
[#] Next page