Newbie with a few questions

<< < (2/2)

tseward:
Jimates,

I just need to clarify your response. I get what you are saying about being logged in to Obitalk Android and desktop x-lite and that they use the same account so thus they when a call comes in it does not know where to go. 

My question as a follow up is... When you say you need to create another Obitalk account are you just referring to  creating another obitalk online account with another softphone number are you saying that I need to buy another device and create another account with that new device.  OR can I just create another Obitalk account and add the soft number to any existing obi device?  Can you help clarify this point before I invest in another device? 

As a clarification on my side I am currently using my current Obi device with two GV numbers one home and one office.

jimates:
You just sign up for another Obitalk account, and you will get another softphone number. You cannot add the other softphone number to an Obi.

Normally you would add the other number to the circle of trust of the Obi and use the services through the auto attendant. You should set up single stage dialing to use the services without going through the auto attendant.

You can use my leapfrog method to get more than one softphone number on the same default gateway. It is easy to do if you don't have an elaborate configuration.


With your Obi110 set as the default gateway for your Obion app you can just dial from the app same as from the phone connected to the Obi.

Default settings only allow for calling through the trunk that is designated as primary for outgoing calls. To use other trunks you must set up single stage dialing through any Obi trunk.

RonR put together a single stage dialing configuration for this purpose. Read this post and follow the link at the end of it.
http://www.obitalk.com/forum/index.php?topic=3094.msg20656#msg20656


See this thread for a good explanation of multiple endpoints and my leapfrog method.
http://www.obitalk.com/forum/index.php?topic=3550.0

Navigation

[0] Message Index

[*] Previous page