POTS Line CallerID Passing

<< < (2/2)

Stewart:
Quote from: Hyperlight on July 07, 2012, 12:34:04 pm

The only change in the ITSP Profile B that i have made is the ProxyServer. Which is set to my PBX IP address 10.1.0.2.
If that's literally true, then X_SpoofCallerID is not set, though it should be.

Otherwise, carefully check the syslog output on a failing call.  Does it show the caller ID being captured, well before the INVITE is sent?  Any other strange events?

What do you have on SP1?  Assuming that it can receive a call, try temporarily setting its InboundCallRoute to SP2(100), and report whether caller ID passes correctly over that link.

Hyperlight:
Ok I fixed the problem. This is a my bad case. I thought that SP2 service would automatically use ITSP Profile B I wasn't aware one had to actually specify it. I changed the profile to "B" and its passing callerID correctly now.

Thanks for your assistance.

Xianren:
Quote from: Stewart on July 06, 2012, 05:31:47 pm

If still no luck, use SIP Debug and syslog to see whether the

HI,Stewart,

I don't know how to use SIP Debug and Syslog. Would you please detail, because I am a newbie.

Thanks.

Navigation

[0] Message Index

[*] Previous page