Obi110 and Cisco SPA-941 without Soft-Phone Help

<< < (2/2)

hwittenb:
I don't believe the SPA941 is much different from my SPA3102.  Most all the Cisco/Linksys devices are very similiar in the way they are configured.  I tested my SPA3102 calling the OBi and making a call out using GV with the following configuration:

SPA3102
Line 1
Register: No
Make Call Without Reg: Yes
Proxy: 192.168.1.108:5069
where 192.168.1.108 is the ip address of the OBI, 5069 is the sip port number that I have configured for SP2    (X_UserAgentPort)

UserID: hwittenb
Dial plan: (xx.)

OBi

SP2
X_InboundCallRoute  ({(hwittenb)>(xxxxxxxxxxx):SP1},{ph}
where hwittenb is the userid configured on the SPA3102 above, SP1 is configured for GoogleVoice

Using ip dialing I am calling SP2 on the OBi which bridges the call to SP1.

 

Navigation

[0] Message Index

[*] Previous page