Voicemail Stutter not working
Fasttimes:
So far the VM Waiting is pretending it is opposite day.
A little background on my setup:
My GV number rings my obi device, and GV also simlurings my iPhone, whose voicemail is forwarded to my GV number. Basically I want to have one voicemail for both my obi and cellphone, which is GV.
Earlier I had no unread messages in Google Voice. I checked the spam and trash folders as well, yet I still had the stutter tone. I rebooted the device and eventually the stutter went away. I was thinking this is just a GV brain fart that needed to be cleared out.
Now I made several test calls to both my obi and cell phone and left messages, all of which appear in GV and at the moment are unread, but I don't hear a stutter tone when I pick up the obi.
How can I troubleshoot this?
pc44:
Hi Fasttimes,
Do you have the following set in your OBI for the pertinent SPx service you are using with GV? Remember to un-check the default box on all of these in order to enable them.
Voice Services -> SP1 (or SP2) -> MWIEnable -> Checked
Voice Services -> SP1 (or SP2) -> X_VMWIEnable -> Checked
Voice Services -> SP1 (or SP2) -> MessageWaiting -> Default Unchecked
Are you using the OBI100, 110, or 202?
pc44
Fasttimes:
Quote from: pc44 on July 09, 2012, 09:40:10 am
Hi Fasttimes,
Do you have the following set in your OBI for the pertinent SPx service you are using with GV? Remember to un-check the default box on all of these in order to enable them.
Voice Services -> SP1 (or SP2) -> MWIEnable -> Checked
Voice Services -> SP1 (or SP2) -> X_VMWIEnable -> Checked
Voice Services -> SP1 (or SP2) -> MessageWaiting -> Default Unchecked
Are you using the OBI100, 110, or 202?
pc44
The 1st two are grayed out, but checked. I unchecked the default box to check them to be certain, however I don't see any "MesssageWaiting" parameter under Voice Service - SP1. Am I in the right place?
ETA: Using The Obi100
ETA: If I go to the dashboard and select "edit SP1" Google Voicemail Notification is checked here. Is that correct?
pc44:
Fasttimes,
After you unchecked the Default box, those settings should no longer be "grayed out."
I just checked my OBi100, and the MessageWaiting option is immediately after the MWIEnable and X_VMWIEnable options. I usually un-check both the MessageWaiting and the default box.
If Google Voice is on your SP1, then yes, you should be in the right place: Voice Services -> SP1 Service -> MessageWaiting
pc44
Fasttimes:
doh... I was using the expert instead of the web-interface.
However the instructions from jimates here seems to contradict yours:
http://www.obitalk.com/forum/index.php?topic=3512.msg24064#msg24064
He says to do this on the SP that has callcentric. You say to do it on the SP with GV. Which is it?
Navigation
[0] Message Index
[#] Next page