Obi202 Call Forward Doesn't Work
Ostracus:
Quote from: dial.tone on July 14, 2012, 01:41:42 pm
Quote from: Ostracus on July 14, 2012, 12:47:28 pm
Odd, worked fine on my Obi202. What firmware is everyone using?
I didn't find specs on firmware, but I found this:
Hardware Version 1.3
Software Version 3.0.0 (Build: 3184M)
Software version is what you're looking for and it's the latest. Also QBZappy, my Obi110 responded the same way as my Obi202.
QBZappy:
Hi,
I just tried the *72, *73 business again. I swear I didn't change anything in the way I did it before. It works.
*72->long dial tone->type telephone number+#->3 shorts confirmation beeps.
Look here in the OBi you will see:
Voice Services
SP1 Service
CallForwardUnconditionalEnable = Check mark
CallForwardUnconditionalNumber = SP1(5145551212)
*73->dial tone (No confirmation beeps like before)
Look here in the OBi you will see:
Voice Services
SP1 Service
CallForwardUnconditionalEnable = No Check mark
CallForwardUnconditionalNumber = SP1(5145551212)
pc44:
So... someone shot the OBiMan in the newer firmwares? I, too, get only a steady tone after entering the star code. So I guess the OBiMan has left us. :'(
But... at least it still works, as verified by QBZappy. :)
dial.tone:
Quote from: pc44 on July 14, 2012, 08:18:27 pm
So... someone shot the OBiMan in the newer firmwares? I, too, get only a steady tone after entering the star code. So I guess the OBiMan has left us. :'(
But... at least it still works, as verified by QBZappy. :)
If you were able to Unforward by dialing *73, then I agree: voice prompts would be nice, but at least it still works. However, if you have to go into "OBI Expert Configuration" to Unforward, it's still broke!
QBZappy:
*72+*73 is seems to be working as it is supposed to.
Navigation
[0] Message Index
[#] Next page
[*] Previous page