SOLVED: Half the time I place a call on PSTN I get SPRINT recording?

<< < (2/2)

QBZappy:
Try disabling call waiting momentarily and try your test again. (NOTE You will need to prefix every test call with *70):

*70 Call Waiting Disable (Per Call)

http://www.yashy.com/star.codes.html

HowardZ:
*70 on telephone handset connected to Obi110 always causes an instant busy signal.

*70 seems to work on a telephone that is not using the Obi110.

BTW, thanks for putting in the time to try and help.

Perhaps I should increase LINE Port: DialDelay from 500 to 1000 ?

HowardZ:
Ok, raising the DialDelay from 500ms to 1000ms solved it.

I tested by dialing my cell phone ten times in a row.

QBZappy:
HowardZ,

Glad it worked out. Enjoy.


Best--
QBZappy

The OBi has its own star dialing codes as well.

Navigation

[0] Message Index

[*] Previous page