Call forwarding is not working.
jimates:
@ QBZappy
Most users do not want to use "the next available line", they want to use a specific line due to caller id. We have dealt with google voice's work around long enough to make sure the correct phone number is displayed when we call. We don't want to go backwards.
With 2 sessions per line the call can come in and go out on the same line to keep the correct caller id in place.
obi-support2:
murzik,
I assume you are using SIP protocol (not GV) on SP1 and SP2, correct?
Please try this setting:
Assume your SP1 is using ITSP Profile A, and SP2 is using ITSP Profile B,
set X_Use302ToCallForward to no (unchecked) under that ITSP Profile.
The default value is yes (checked).
--------
What this option does is to let your OBi send back a SIP 302 response to the caller (on SP2 in this case) which might not be processed by your ITSP B. OBi at this time is not smart enough to automatically turn off option 302 when you tried to forward btw SP1 and SP2 if they are on different ITSP Profile. Option 302 would be appropriate if SP1 and SP2 are indeed with the same ITSP (and if that works, would be more efficient).
murzik:
Thanks!
It is working.
There is still one drawback. I understand that there is maybe no way around, but instead of showing CID of phone originated the call, number of GV account I am using as forwarding account will appear.
So if some on will call my home phone and I have call forwarding enabled, on my destination phone I will see my own home number instead of number of person who’s calling me.
::)
jimates:
Calls that go out on a GV line don't originate on the Obi. They originate at google as if you are placing the call from google chat. So the GV number will always show up when calls are forwarded through that spx line.
Navigation
[0] Message Index
[*] Previous page