Disable numbers

(1/2) > >>

JohnBoy:
Hi,

I'd like to disable outgoing calls to certain #s,  such as 1-900.   Any pointers?  Thanks in advance.

JohnBoy:
I suppose one could just redirect to the physical port,  as in the 911 method,  if one has a dead loop line there...

Felix:
Fairly easy with DigitMap in Physical interfaces -> Phone. In fact, if there is no route matching 1-900, the call will not go through. Or you can explicitly put !1900x. and all calls starting with 1900 will be barred (see Admin guide, p. 169 for more details

JohnBoy:
So "RTFM."    Thank you!  I'll check the manual there.  Remapping (different part of manual) didn't work for me (so far).

jimates:
Example:  To block calls to area codes 900 & 976

Create a user defined digit map named "abc"
Enter this as the abc digit map   (1900xxxxxxx|900xxxxxxx|1976xxxxxxx|976xxxxxxx)

Physical Interfaces -> Phone Port -> X_OutboundCallRoute
add this to the front of the call route, be sure to include the comma      {(Mabc):},

With this rule, anything matching the entries in the abc digit map will get the "there is no service....." message.
Add any area codes you wish to block to the "abc digit map. Make sure you use the separator.

Navigation

[0] Message Index

[#] Next page