Disable numbers
BLANK:
hello everyone
I have tried and read the above post about disabling nmbers but it is NOT working for me.any help anyone?
I want to block ALL outgoing calls to country code 225 and 241 here is my digitmap
I Created a user defined digit map named "abc"
I have Entered this as the abc digit map (2259xxxxxxx|9xxxxxxx|241xxxxxxxx|241xxxxxxxx) 6xxxxxxx|976xxxxxxx)
Physical Interfaces -> Phone Port -> X_OutboundCallRoute
I have added this to the front of the call route, including the comma {(Mabc):},
"I should be getting there is no service ......message but i am not the call is going thru"
please help
With this rule, anything matching the entries in the abc digit map will get the "there is no service....." message.
Add any area codes you wish to block to the "abc digit map. Make sure you use the separator.
pc44:
Hi Blank,
I think you have a possible problem here:
(2259xxxxxxx|9xxxxxxx|241xxxxxxxx|241xxxxxxxx) 6xxxxxxx|976xxxxxxx)
Try removing the parentheses and the space after it, and try using the vertical pipe | instead. Also, count the number of x's to make sure they are right for each outbound scenario.
pc44
BLANK:
Hi PC44
thanks so much for your reply;actually it was my mistake the way it is entered is like so:
(2259xxxxxxx|9xxxxxxx|241xxxxxxxx|241xxxxxxxx) with 229 been the country code 9xxxxxxx being the number.
counting them does the count it is an 8 digit total including the 9.
Physical Interfaces -> Phone Port -> X_OutboundCallRoute is entered like this:
{(Mabc):},{(<#:>|911):li},{**0:aa},{***:aa2},{(Mpli):pli},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp
can you please confirm that it is the proper way?
thanks again
BLANK:
Please note that I have PSTN set up as Primary Line (as opposed to phone?in the thread?)
cheers
jimates:
I compared your Phone OCR to mine. Your route has the same rules, just in a different order.
Your listed call route is not closed on the end with a )
Try this
{(Mabc):},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Navigation
[0] Message Index
[*] Previous page