Problems setting up a dial plan
maddawg:
Need some assistance setting up a dial plan. Tried a few and no luck so far. I have a obi110 and trying to accomplish the following. Signed up with freephoneline.ca and would like to restrict certain area codes. FPL is setup on SP1 and voip.ms on SP2. Would like to have all freephoneline (allow you to call certain area codes for free) area codes go through sp1 and long distance calls through sp2. Still trying to wrap my head around this dialplan and wish it was a bit easier to create.
ianobi:
I guess the friendly experts here are waiting for more details on this one:
Is there any service on your Line Port?
Which is your primary line - Line Port, sp1 or sp2?
Exactly what codes need to go to FPL?
Are all the numbers 11 digit?
Posting some of your attempts would help explain what you are trying to achieve.
Help is out here (some of the time :))
I am busy drinking tea and watching cricket for the next 24hrs. If nobody has picked your info up and helped by then, I will have a go after that. Good luck :)
QBZappy:
ianobi,
Give it a shot. No one owns this forum. Have some fun with it.
jimates:
See this thread http://www.obitalk.com/forum/index.php?topic=933.20
perhaps something in the second post will help out.
maddawg:
There is no service on my line port. Currently have phone service, but wanted to switch to voip exclusively. Freephoneline is a service being offered in Canada and allows free calling to specific area's. Looked at this thread, but again still trying to wrap my head around it all.
http://www.obitalk.com/forum/index.php?topic=3390.0
I will look at the link jimates provided. Quickly read through it and seems lots of information for what I need to do.
Navigation
[0] Message Index
[#] Next page