Bridge Incoming calls on PSTN Line with SP1

(1/4) > >>

Shashank:
I'm one the new owners of the fantastic device called Obi110 ;)

Whats the current setup (Obi110 is connected and configured in INDIA) and i will be in USA:

PSTN Line and Phone Connected , SP1 configured with Google Voice, Installed OBiON iPhone App.

I can make unlimited calls to any US number using the GVoice (SP1) using the phone instrument connected. I can make calls to local indian numbers by bridging using the iPhone App PSTN line connected to Obi110.

This is what i want my setup to be:

1. Forward ALL the incoming calls of the PSTN Line to my USA Mobile Number THROUGH SP1(Google Voice) along with the CallerID. I want to bridge the incoming call rather than paying international call charges by diverting the calls to USA Number!
And i DON'T want the calls to be forwarded to OBiON iPhone App but to my (US) mobile number as i want to be less dependent on the Data Network!

2. Though i can make outgoing calls to India by bridging with iPhone App, as i want to be less dependent on the data network, i will configure Google Voice on SP2 as well and any calls to this (SP2) number should be presented with AA and should be able to call and bridge Indian numbers.

3. I'm planning to replace the PSTN line with a GSM Gateway (with FXS port)...so is it possible to forward incoming SMS?

And BTW, how do i restart the device through ObiTalk portal?  ???

jimates:
Quote from: Shashank on July 19, 2012, 07:29:08 am

I'm one the new owners of the fantastic device called Obi110 ;)

Whats the current setup (Obi110 is connected and configured in INDIA) and i will be in USA:

PSTN Line and Phone Connected , SP1 configured with Google Voice, Installed OBiON iPhone App.

I can make unlimited calls to any US number using the GVoice (SP1) using the phone instrument connected. I can make calls to local indian numbers by bridging using the iPhone App PSTN line connected to Obi110.

This is what i want my setup to be:

1. Forward ALL the incoming calls of the PSTN Line to my USA Mobile Number THROUGH SP1(Google Voice) along with the CallerID. I want to bridge the incoming call rather than paying international call charges by diverting the calls to USA Number!
And i DON'T want the calls to be forwarded to OBiON iPhone App but to my (US) mobile number as i want to be less dependent on the Data Network!

2. Though i can make outgoing calls to India by bridging with iPhone App, as i want to be less dependent on the data network, i will configure Google Voice on SP2 as well and any calls to this (SP2) number should be presented with AA and should be able to call and bridge Indian numbers.

3. I'm planning to replace the PSTN line with a GSM Gateway (with FXS port)...so is it possible to forward incoming SMS?

And BTW, how do i restart the device through ObiTalk portal?  ???

When a call is forwarded, a new call will be made, using google voice, to the forwarding number and the incoming call is bridged to the new call. All calls made on google voice can only carry the caller id of the google voice number. There is no way to forward the original caller id using google voice. It can be done using the Obitalk service and the app.

QBZappy:
Quote from: Shashank on July 19, 2012, 07:29:08 am

And BTW, how do i restart the device through ObiTalk portal?  ???


If you mean, how do I reboot the device through ObiTalk portal, then you just need to make any change in your configuration on the portal and press submit. The Obi should reboot.

Shashank:
Quote from: QBZappy on July 19, 2012, 09:24:11 am

Quote from: Shashank on July 19, 2012, 07:29:08 am

And BTW, how do i restart the device through ObiTalk portal?  ???


If you mean, how do I reboot the device through ObiTalk portal, then you just need to make any change in your configuration on the portal and press submit. The Obi should reboot.


That's cool :)

Can you please give me the configuration settings for both forwarding through SP1(GV) and Obi Service to preserve CallerID...

Kindly do problem to my 2nd Query as well..

jimates:
The original caller id is carried by default when forking calls to another endpoint.

And i DON'T want the calls to be forwarded to OBiON iPhone App but to my (US) mobile number as i want to be less dependent on the Data Network!

To fork calls to both the Obi phone port and your softphone number
Voice Service -> SP1 Service -> X_InboundCallRoute = {ph,pp(ob290xxxxxx)} Where 290xxxxx is your softphone number used with your Obion app.

For incoming calls to the GV number on SP2 to be presented to the auto attendant
Voice Service -> SP2 Service -> X_InboundCallRoute = {AA}
Which line is set as primary for outgoing calls?

Navigation

[0] Message Index

[#] Next page