Blocking certain outgoing calls

(1/3) > >>

DirtAddsHP:
Hello,

I have found guides on how to block incoming calls by phone number, but how would i block certain numbers from being called out?

Would i use the Digit Map and OutboundCallRoute?

thanks

EDIT: forgot to list that i have a Obi110

jimates:
See if you find anything in this short discussion that will help.
http://www.obitalk.com/forum/index.php?topic=3682.0

If you want to block specific numbers, just replace my example for area codes with those specific numbers.

DirtAddsHP:
Ah great well i tried what you post and also the correction. If i make a call it sets my OutboundCallRoute back to defaults.. like the settings will not stay the way i set them.

any ideas? I log in as admin when going to my Obi box by its IP address, but if i try to log in "User Login" in the upper right corner i cannot authenticate.

jimates:
If you are managing your device directly (using the ip address of your obi) you must disable auto provisioning or your changes will not stay. They will be over written by the Obitalk portal every time.

System Management -> Auto Provisioning -> ITSP Provisioning = disabled

DirtAddsHP:
Hmm seems i had to disable in two places

ITSP Provisioning

and

OBiTalk Provisioning

Though it seems the digitmap is not taking effect. i can still call out to the 3 phone numbers i listed in OutboundCallRoute

but now the settings are holding.... did i miss something?

Navigation

[0] Message Index

[#] Next page