Error 500 when placing a call
yehuda:
Hi guys,
I am a happy Obi110 owner and I need help setting up a local provider here in Israel.
I can receive calls, but when I try to place a call I hear "the number you dialed was rejected by the service provider. Reason is 500."
How would I go about troubleshooting this?
If it helps, I can confirm that outbound calls work through a Windows softphone (Blink). No special configuration needed there.
pc44:
Hi yehuda,
After searching the forum, it appears that Error 500 is an "Internal Server Error." Take a look at this thread. I realize that your softphone works properly, but you may need to contact your VoIP provider to troubleshoot this.
If you would like to provide your current configuration settings here, perhaps someone in the forum could review them. Contacting your provider may be quicker. It's up to you.
pc44 :)
yehuda:
Hi pc44,
Thank you for the kind reply. My provider does not support BYOD so I am pretty much on my own here. I understand that of all possible errors I landed on a particularly ambiguous one, which is not unlike the infamous HTTP 500 error. Could be anything really. I'm not getting my hopes up, but still willing to experiment a little.
I tested the Obi with two other providers: Localphone and Sipme (an Israeli provider). With Sipme I could dial numbers in local format, so I assume that the issue is not caused by the default Digitmaps, even though I have yet to localize them.
Suppose I wanted to delve deeper into the logs, is there a debug console I could look at? I didn't see one in the web interface. I understand Wireshark might also come in handy. I have basic experience with it but am not sure how to set it up to listen on Obi<->server communication.
pc44:
Quote from: yehuda on July 30, 2012, 08:45:23 am
Suppose I wanted to delve deeper into the logs, is there a debug console I could look at?
I'd highly recommend setting up a syslog for debugging purposes, as the OBI's do support syslog. From there, we -may- learn more about the error occurring. Does this error occur only when using 7-digit dialing, or does it occur all the time for you? Also, is the Obi registering successfully (if required) with your VoIP provider?
Just some thoughts,
pc44
QBZappy:
yehuda,
You need to read this:
http://www.obihai.com/FAQ.html
How to do I set-up and collect a syslog from an OBi device?
Download OBihai Syslog Server (DOS)
http://www.obihai.com/docs/syslogd.zip
Configure the OBi to output here:
System Management->Server Enabled
(pc44 where did you take your speed typing course? :D)
Navigation
[0] Message Index
[#] Next page