News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

2 obis 2 GVs 2 addresses

Started by ibotalk, July 30, 2012, 07:15:13 PM

Previous topic - Next topic

ibotalk

can i get one obi to ring the other--- and vv automatically ---so if i am at address 1 and someone calls the address 2 (either via landline or via GV #) it will also ring at address 1  (and vice versa)
thanks

jimates

#1
Assuming you have google voice on SP1 of each device.
You want to set the Obi to fork the incoming calls from SP1 & the Line to both the phone port on the device and to the other Obi.


Voice Service -> SP1 -> X_InboundCallRoute = {ph,pp(ob290xxxxxx)}
Physical Interface -> Line -> InboundCallRoute = {ph,pp(ob290xxxxxx)}
where 290xxxxxx is the number of the opposite Obi.

And check to make sure the Voice Service -> Obitalk Service -> InboundCallRoute = ph

Do this on both Obi's using the number of the opposing Obi.

This will ring both Obi's when a call comes in on either the line or SP1 at either end.

pfranks

thanks

so there are 2 obi numbers on each device
one is obi # and is 290xxxxxx
it has a headphone symbol, called sp 1, and an orange head indicating offline

the other,has an obi device-like symbol, called sp2, has a green symbol indicating online and is 200xxxxxx  (it is also referred to as the obi gateway)

what is the difference--- can either be used?

jimates

Sorry, I should have used 200xxxxxx instead of 290xxxxxx.

The 290xxxxxx is the softphone number. Every Obitalk account has one. It can be used for Obion apps on smartphones or Obion for PC. The 200xxxxxx is the Obi.

290xxxxxx for softphone numbers
200xxxxxx for Obi110
300xxxxxx for Obi100
500xxxxxx for Obi 202

Use the number for the device, 200xxxxxx in the configuration.

pfranks

ok, got it
i forgot to mention that one of the obis is a 100 the other is a 110
does this affect the coding you provided
thanks

jimates

No, just use the appropriate number for the device you want to forward to.